EFLOW USA, LLC 184 S. LIVINGSTON AVENUE STE 9107 LIVINGSTON, NJ 07039

Arlo Hotel at 351 W 38th St, NYC

Arlo Hotel located at 351 W 38th St, NYC will feature eFlow-Constant Airflow Regulators. eFlow-CARs set to 50 CFM were installed in every guest room to automatically balance airflow, promote high indoor air quality and energy savings. This 20 story hotel designed by Marvel Architects will feature 353 guest rooms. The grand opening is planned for 2021. 

About eFlow-CAR

eFlow-Constant Airflow Regulator (CAR) is a low-cost solution for balancing ventilation systems, eliminating the need for on-site balancing and ongoing maintenance. The Constant Airflow Regulator’s control of airflow is essential to optimize energy consumption while providing good air quality. eFlow-CARs are  UL 2043 Classified (R38307) devices that automatically adjust to environmental changes in stack pressure and accurately regulate airflow. Constant Airflow Regulators are self-regulating and adjustable flow-regulators used in commercial and residential buildings. The desired airflow is fixed by a screwdriver. It is automatically calibrated to varying pressures without the need for electricity. Constant Airflow Regulators save energy by precisely controlling airflow into or out of a space. This is accomplished regardless of static pressure while providing good air quality.

eFlow-CAR FACTS

  • UL 2043 Classified
  • Composed of fire resistant UL 94 ABS plastic
  • Diameters offered: 3”, 4″, 5”, 6”, 8″, 10″
  • Operating Pressure Range: 0.08 to 2.4 in w.g. (20-600Pa)
  • Airflow settings: 15-765 CFM
  • Temperature Limits: -22° to 140°F (-30° to 60°C)
  • Suitable for both supply and exhaust applications
  • No external power supply needed
  • Field Adjustable CFM set point
  • Capable of maintaining constant airflow within +- 5% for nominal airflow throughout the target operating pressure range of 0.08 to 2.4 in.
  • Standard for Energy Efficient Compliance

 

Visit eflowshop.net for product information and pricing or email sales@eflowusa.net

 

 

 

 

 

 

 

 

 

 

Supprier to American Aldes assemblies: ccar-ii, car-iia, ccar-ii-lp, car-ii-hp, car-fea-ii, car-fsa-ii, cer-s-ii, cer-r-ii, cer-lp-sii, cer-lp-r-ii, cer-s-iir, cer-lp-s-iir, cer-fea-ii, cer-fea-iir, cer-lp-fea-ii, cer-lp-fea-iir, csr-s-ii, csr-r-ii, csr-lp-s-ii, csr-lp-r-ii, csr-s-iir, csr-lp-s-iir, csr-fsa-ii, csr-fsa-iir, csr-lp-fsa-ii, csr-lp-fsa-iir, cerb-ws-ii, cerb-wb-ii, cerb-cs-ii, cerb-cfs-ii, cerb-cfb-ii, csrb-ws-ii, csrb-wb-ii, csrb-cs-ii, csrb-cfs-ii, csrb-cfb-ii, Constant Exhaust Registers, Constant Supply Registers, Constant Exhaust Register Box, Constant Supply Register Box, zone register terminals, zrt, zrt-s, zrt-fr, zrt-frs, zrt-w, zrt-ws, zrt-w-fr, zrt-w-frs, zrt-il, zrt-pdil, zrt-pdil-hp, zrt-3pdil, zrt-3pdil-hp, zrt-sdil, zrt-sdil-1-hp

Aldes, American Aldes, car ii, car iia, car ii lp, car ii hp, car fea ii, car fsa ii, cer s ii, cer r ii, cer lp sii, cer lp r ii, cer s iir, cer lp s iir, cer fea ii, cer fea iir, cer lp fea ii, cer lp fea iir, csr s ii, csr r ii, csr lp s ii, csr lp r ii, csr s iir, csr lp s iir, csr fsa ii, csr fsa iir, csr lp fsa ii, csr lp fsa iir, cerb ws ii, cerb wb ii, cerb cs ii, cerb cfs ii, cerb cfb ii, csrb ws ii, csrb wb ii, csrb cs ii, csrb cfs ii, csrb cfb ii, zrt s, zrt fr, zrt frs, zrt w, zrt ws, zrt w fr, zrt w frs, zrt il, zrt pdil, zrt pdil hp, zrt 3pdil, zrt 3pdil hp, zrt sdil, zrt sdil 1 hp

United enertech precision flow system crb-10-s, crb 10 s, crb-10-e, crb 10 e, crb-10-e-cd, crb 10 e cd, crb-10-s-cd, crb 10 s cd, crb-10-e-cd, crb 10 e cd, united enertech precision flow model cr, precision flow model cr-lp, precision flow model cr-hp, young regulator cvr constant volume regulator ,model cvrf5, model cvr8, cvp plus enh

eFlow CAR can be used as equivalent to aldes CAR3, CAR3-s, CER3-S, CER3-R, CER3-S-F, CSR3-S, CSR3-R, CSR3-S-F, CEB3-WS, CEB3-WB, CEB3-CS, CEB3-CS-F, CSB3-WS, CSB3-WB, CSB3-CS, CSB3-CS-F

eFlow-MAX High Capacity Constant Airflow Regulator Testing

eFlow-MAX Testing 

Independent testing of eFlow-MAX High Capacity Constant Airflow Regulator was conducted by Weickert Industries, Inc at the request of Hunter Roberts Construction Group, for project : Sven at Queens Plaza Park.

Testing took place at the Queens Park Plaza Tower on September, 25, 2019. A system was built for testing purposes by Delta Sheet Metal Corp, an affiliate of PJ Mechanical Corp.

Four eFlow-MAX regulators  set to specific CFM setting were put to the test over the entire pressure range from 0.2 to 4.0  w.g. (50-1000Pa)

 

A report issued by Weickert industries, Inc, dated September 27, 2019 illustrates findings of the tests as follows:

eFlow-MAX 4”, set to 45 CFM, over the entire pressure range of 0.25 to 4.0 in w.g. performed at an average of 46 CFM

eFlow-MAX 4”, set to 60 CFM, over the entire pressure range of 0.25 to 4.0 in w.g. performed at an average of 58.9 CFM

eFlow-MAX 4”, set to 50 CFM, over the entire pressure range of 0.25 to 4.0 in w.g. performed at an average of 54.6 CFM

eFlow-MAX 3”, set to 25 CFM, over the entire pressure range of 0.25 to 4.0 in w.g. performed at an average of 27.4 CFM

About eFlow-MAX 

eFlow-MAX is a field adjustable High Capacity Constant Airflow Regulator. It is designed to operate within Pressure Range: 0.2 to 4.0 in w.g. (50-1000Pa), automatically and precisely balance airflow into or out of a space without the need for electricity. Its design saves a significant amount of energy and provides High Indoor Air Quality. This round damper provides pressure-independent maximum constant airflow in round duct systems without the use of electricity, sensors or controls. As pressure increases, the blade moves to keep airflow stable over a wide pressure range. eFlow-MAX has an external mechanism that can be used to adjust airflow manually, and with ease, using an allen wrench (2mm). eFlow-MAX can be easily installed inside standard ductwork. Mounting may be horizontal or vertical. eFlow-MAX features laser-welded, heavy galvanized steel body, plastic airflow control and an airtight seal to ensure no-leak fit.

About Sven

Sven is a new 755-foot tall residential tower located at 27-29 Queens Plaza North and 29-37 41st Avenue in Long Island City. This 67-story tower is owned and has been developed by the Durst Organization. It was designed by Handel Architects, with Selldorf Architects in charge of the project’s interior, lobby, and amenities. The engineering firm JB&B and  The Fulcrum Group provided mechanical engineering services. HRCG-Hunter Roberts construction group carried out the construction of the project and Delta sheet metal and PJ mechanical were the mechanical contractors for the project.

Sven will feature 958 residential units, 287 of which will be dedicated to affordable housing. The tower will include an outdoor pool, fitness center, resident’s library, co-working space, children’s playroom, and a demonstration kitchen. The Sven is situated adjacent to the historic Long Island City Clock Tower in Queens. The Sven will be the second-tallest skyscraper in the neighborhood . Completion of the project  is expected in 2021.

eFlow-MAX is equal to Aldes MR MAX

The Madison House at 15 East 30th Street, NYC

In the heart of the stylish NoMad neighborhood, Madison House is the tallest residential skyscraper located at 15 East 30th Street, NYC. This 805-foot-tall structure offers unsurpassed panoramic views of New York City, where every residence has a corner window and 11-foot ceilings or higher. Fosun Group and JD Carlise are developers of this 62-story tower designed by Handel Architects.  This superstructure includes eFlow-Constant Airflow Regulators installed in 6”x6” Ceiling Mount Box with thin line ceiling fire dampers to ensure automatically balanced airflow, eliminate stack effect and promote energy savings and high indoor air quality. 

CAR Installation was undertaken by MEP contractor, Alliance Mechanical Group, Inc. The manufacturers representative, Mechanical Technologies, facilitated the sale of eFlow products for the Madison House project.  

About eFlow-CAR

eFlow-Constant Airflow Regulator (CAR) is a low-cost solution for balancing ventilation systems, eliminating the need for on-site balancing and ongoing maintenance. The Constant Airflow Regulator’s control of airflow is essential to optimize energy consumption while providing good air quality. eFlow-CARs are  UL 2043 Classified (R38307) devices that automatically adjust to environmental changes in stack pressure and accurately regulate airflow. Constant Airflow Regulators are self-regulating and adjustable flow-regulators used in commercial and residential buildings. The desired airflow is fixed by a screwdriver. It is automatically calibrated to varying pressures without the need for electricity. Constant Airflow Regulators save energy by precisely controlling airflow into or out of a space. This is accomplished regardless of static pressure while providing good air quality.

eFlow-CAR FACTS

  • UL 2043 Classified
  • Composed of fire resistant UL 94 ABS plastic
  • Diameters offered: 3”, 4″, 5”, 6”, 8″, 10″
  • Operating Pressure Range: 0.08 to 2.4 in w.g. (20-600Pa)
  • Airflow settings: 15-765 CFM
  • Temperature Limits: -22° to 140°F (-30° to 60°C)
  • Suitable for both supply and exhaust applications
  • No external power supply needed
  • Field Adjustable CFM set point
  • Capable of maintaining constant airflow within +- 5% for nominal airflow throughout the target operating pressure range of 0.08 to 2.4 in.
  • Standard for Energy Efficient Compliance

 

Visit eflowshop.net for product information and pricing or email sales@eflowusa.net

 

 

 

 

 

 

 

 

 

 

Supprier to American Aldes assemblies: ccar-ii, car-iia, ccar-ii-lp, car-ii-hp, car-fea-ii, car-fsa-ii, cer-s-ii, cer-r-ii, cer-lp-sii, cer-lp-r-ii, cer-s-iir, cer-lp-s-iir, cer-fea-ii, cer-fea-iir, cer-lp-fea-ii, cer-lp-fea-iir, csr-s-ii, csr-r-ii, csr-lp-s-ii, csr-lp-r-ii, csr-s-iir, csr-lp-s-iir, csr-fsa-ii, csr-fsa-iir, csr-lp-fsa-ii, csr-lp-fsa-iir, cerb-ws-ii, cerb-wb-ii, cerb-cs-ii, cerb-cfs-ii, cerb-cfb-ii, csrb-ws-ii, csrb-wb-ii, csrb-cs-ii, csrb-cfs-ii, csrb-cfb-ii, Constant Exhaust Registers, Constant Supply Registers, Constant Exhaust Register Box, Constant Supply Register Box, zone register terminals, zrt, zrt-s, zrt-fr, zrt-frs, zrt-w, zrt-ws, zrt-w-fr, zrt-w-frs, zrt-il, zrt-pdil, zrt-pdil-hp, zrt-3pdil, zrt-3pdil-hp, zrt-sdil, zrt-sdil-1-hp

Aldes, American Aldes, car ii, car iia, car ii lp, car ii hp, car fea ii, car fsa ii, cer s ii, cer r ii, cer lp sii, cer lp r ii, cer s iir, cer lp s iir, cer fea ii, cer fea iir, cer lp fea ii, cer lp fea iir, csr s ii, csr r ii, csr lp s ii, csr lp r ii, csr s iir, csr lp s iir, csr fsa ii, csr fsa iir, csr lp fsa ii, csr lp fsa iir, cerb ws ii, cerb wb ii, cerb cs ii, cerb cfs ii, cerb cfb ii, csrb ws ii, csrb wb ii, csrb cs ii, csrb cfs ii, csrb cfb ii, zrt s, zrt fr, zrt frs, zrt w, zrt ws, zrt w fr, zrt w frs, zrt il, zrt pdil, zrt pdil hp, zrt 3pdil, zrt 3pdil hp, zrt sdil, zrt sdil 1 hp

United enertech precision flow system crb-10-s, crb 10 s, crb-10-e, crb 10 e, crb-10-e-cd, crb 10 e cd, crb-10-s-cd, crb 10 s cd, crb-10-e-cd, crb 10 e cd, united enertech precision flow model cr, precision flow model cr-lp, precision flow model cr-hp, young regulator cvr constant volume regulator ,model cvrf5, model cvr8, cvp plus enh

eFlow CAR can be used as equivalent to aldes CAR3, CAR3-s, CER3-S, CER3-R, CER3-S-F, CSR3-S, CSR3-R, CSR3-S-F, CEB3-WS, CEB3-WB, CEB3-CS, CEB3-CS-F, CSB3-WS, CSB3-WB, CSB3-CS, CSB3-CS-F

Search for products

Back to Top
Product has been added to your cart