EFLOW USA, LLC 184 S. LIVINGSTON AVENUE STE 9107 LIVINGSTON, NJ 07039

Verona Senior Citizens Apartments, Verona, NJ

The Verona Senior Citizens Apartments installed eFlow-Constant Airflow Regulators in order to automatically balance the building’s ventilation system, promote High Indoor Quality (IAQ) and achieve energy savings. Due to tight existing conditions, eFlow’s smallest CAR 3” (10-30 CFM adjustable ) was chosen as the ideal solution for this application. 

The Verona Senior Citizens Apartments is an affordable six story building serving eligible elderly applicants 62 years of age or older and disabled individuals and their families.  The building was originally built in 1981 and has undergone many renovations and updates over the years.  In total, there are 159 studio and one-bedroom apartments.

About eFlow-CAR

eFlow-Constant Airflow Regulator (CAR) is a low-cost solution for balancing ventilation systems, eliminating the need for on-site balancing and ongoing maintenance. The Constant Airflow Regulator’s control of airflow is essential to optimize energy consumption while providing good air quality. eFlow-CARs are  UL 2043 Classified (R38307) devices that automatically adjust to environmental changes in stack pressure and accurately regulate airflow. Constant Airflow Regulators are self-regulating and adjustable flow-regulators used in commercial and residential buildings. The desired airflow is fixed by a screwdriver. It is automatically calibrated to varying pressures without the need for electricity. Constant Airflow Regulators save energy by precisely controlling airflow into or out of a space. This is accomplished regardless of static pressure while providing good air quality.

eFlow-CAR FACTS

  • UL 2043 Classified
  • Composed of fire resistant UL 94 ABS plastic
  • Diameters offered: 3”, 4″, 5”, 6”, 8″, 10″
  • Operating Pressure Range: 0.08 to 2.4 in w.g. (20-600Pa)
  • Airflow settings: 15-765 CFM
  • Temperature Limits: -22° to 140°F (-30° to 60°C)
  • Suitable for both supply and exhaust applications
  • No external power supply needed
  • Field Adjustable CFM set point
  • Capable of maintaining constant airflow within +- 5% for nominal airflow throughout the target operating pressure range of 0.08 to 2.4 in.
  • Standard for Energy Efficient Compliance

 

Visit eflowshop.net for product information and pricing or email [email protected]

 

 

 

 

 

 

 

 

 

 

 

 

 

Supprier to American Aldes assemblies: ccar-ii, car-iia, ccar-ii-lp, car-ii-hp, car-fea-ii, car-fsa-ii, cer-s-ii, cer-r-ii, cer-lp-sii, cer-lp-r-ii, cer-s-iir, cer-lp-s-iir, cer-fea-ii, cer-fea-iir, cer-lp-fea-ii, cer-lp-fea-iir, csr-s-ii, csr-r-ii, csr-lp-s-ii, csr-lp-r-ii, csr-s-iir, csr-lp-s-iir, csr-fsa-ii, csr-fsa-iir, csr-lp-fsa-ii, csr-lp-fsa-iir, cerb-ws-ii, cerb-wb-ii, cerb-cs-ii, cerb-cfs-ii, cerb-cfb-ii, csrb-ws-ii, csrb-wb-ii, csrb-cs-ii, csrb-cfs-ii, csrb-cfb-ii, Constant Exhaust Registers, Constant Supply Registers, Constant Exhaust Register Box, Constant Supply Register Box, zone register terminals, zrt, zrt-s, zrt-fr, zrt-frs, zrt-w, zrt-ws, zrt-w-fr, zrt-w-frs, zrt-il, zrt-pdil, zrt-pdil-hp, zrt-3pdil, zrt-3pdil-hp, zrt-sdil, zrt-sdil-1-hp

Aldes, American Aldes, car ii, car iia, car ii lp, car ii hp, car fea ii, car fsa ii, cer s ii, cer r ii, cer lp sii, cer lp r ii, cer s iir, cer lp s iir, cer fea ii, cer fea iir, cer lp fea ii, cer lp fea iir, csr s ii, csr r ii, csr lp s ii, csr lp r ii, csr s iir, csr lp s iir, csr fsa ii, csr fsa iir, csr lp fsa ii, csr lp fsa iir, cerb ws ii, cerb wb ii, cerb cs ii, cerb cfs ii, cerb cfb ii, csrb ws ii, csrb wb ii, csrb cs ii, csrb cfs ii, csrb cfb ii, zrt s, zrt fr, zrt frs, zrt w, zrt ws, zrt w fr, zrt w frs, zrt il, zrt pdil, zrt pdil hp, zrt 3pdil, zrt 3pdil hp, zrt sdil, zrt sdil 1 hp

United enertech precision flow system crb-10-s, crb 10 s, crb-10-e, crb 10 e, crb-10-e-cd, crb 10 e cd, crb-10-s-cd, crb 10 s cd, crb-10-e-cd, crb 10 e cd, united enertech precision flow model cr, precision flow model cr-lp, precision flow model cr-hp, young regulator cvr constant volume regulator ,model cvrf5, model cvr8, cvp plus enh

eFlow CAR can be used as equivalent to aldes CAR3, CAR3-s, CER3-S, CER3-R, CER3-S-F, CSR3-S, CSR3-R, CSR3-S-F, CEB3-WS, CEB3-WB, CEB3-CS, CEB3-CS-F, CSB3-WS, CSB3-WB, CSB3-CS, CSB3-CS-F

 

Launching e2Flow®, the eFlow-CAR Dual Flow Damper

At eFlow USA, we never stop innovating. We are proud to announce the launch of the new e2Flow® , the eFlow-CAR Dual Flow Damper. Available exclusively at eFlow USA! 

eFlow-CAR Dual Flow Dampers (e2Flow®) are self-regulating motorized dampers designed to introduce flexibility and dynamic control in central ventilation systems. The module opens and closes via a blade controlled by Belimo actuator, eliminating the need for expensive electronic control systems. e2Flow is available in 6”, 8”, 10”, 12” diamater. e2Flow features built in eFlow-CAR to allow for minimum controlled airflow. It combines low-flow and on-demand high-flow ventilation while using the same central fan system. In the “off cycle” position, the factory-calibrated eFlow-CAR allows for steady, low-flow ventilation (min setting). In the “on cycle”, the maximum flow rate is allowed. eFlow-CARs are factory set Constant Airflow Regulators that are designed to save a significant amount of energy by precisely controlling airflow into or out of a space.  This is done regardless of static pressure. The use of eFlow CARs helps ensure High Indoor Air Quality (IAQ). eFlow-CARs are composed of UL94V-0 ABS plastic and are UL 2043 safety classified (labeled for flame and smoke generation). They feature a self-regulating aero-wing and spring piston design to maintain factory preset air flows. 

e2Flow® KEY FEATURES

  • Diameters offered: 6”, 8”, 10”, 12” 
  • Operating Pressure Range: 0.2” w.c. to 2.4” w.c. 
  • Two position pressure-independent damper with integrated eFlow-CAR 
  • Minimum airflow settings:10-295 CFM 
  • Field adjustable CFM setpoint
  • Suitable for both supply and exhaust applications
  • Maximum operating temperature: 180° F
  • Operated by Belimo actuator: 24V or 120V
  • Galvanized steel casing
  • Closed position (off cycle/default) airflow is delivered via built-in CAR (min flow)
  • Open position (on cycle) the blade is fully open (max flow)
  • eFlow-CARs are composed of UL94v-0 ABS plastic
  • eFlow-CARs are UL2043 classified
  • Easy In-Line installation (no mounting hardware or additional support required) 
  • Maintenance free and corrosion-proof under normal conditions
  • Patent pending
  • Made in USA
  • Warranty guaranteed for (5) years

APPLICATIONS

  •  Energy Efficiency Programs
  •  Subsidized Housing Projects
  •  Government Facilities
  •  Military facilities
  •  Healthcare
  •  High Rises
  •  Commercial Buildings
  •  Residential Buildings
  •  Assisted Living Facilities
  •  Hospitality/Hotels
  •  Dormitories and Schools Buildings
  •  Office buildings

 

For more information contact us today 1-833-356-9872 or [email protected]

Visit eflowshop.net/shop

American Aldes ZRT alternative solution zrt, zrt-s, zrt-fr, zrt-frs, zrt-w, zrt-ws, zrt-w-fr, zrt-w-frs, zrt-il, zrt-pdil, zrt-pdil-hp, zrt-3pdil, zrt-3pdil-hp, zrt-sdil, zrt-sdil-1-hp zrt s, zrt fr, zrt frs, zrt w, zrt ws, zrt w fr, zrt w frs, zrt il, zrt pdil, zrt pdil hp, zrt 3pdil, zrt 3pdil hp, zrt sdil, zrt sdil 1 hp

 

Search for products

Back to Top
Product has been added to your cart