1-833-356-9872 [email protected]
EFLOW USA, LLC 184 S. LIVINGSTON AVENUE STE 9107 LIVINGSTON, NJ 07039
0 $0.00

Tag: Mechanical Engineering

Home / Tagged "Mechanical Engineering"
April 10, 2023 BY
IN eFlow News, eFlow USA, eFlow USA News

Reducing Carbon Footprint

As the world continues to grapple with the impacts of climate change, reducing our carbon footprint has become increasingly important. One way to contribute to this effort is through the installation of a eFlow-Constant Airflow Regulator (eFlow-CAR) in buildings. eFlow-CARs are innovative devices that help regulate the flow of air in HVAC systems, resulting in a more energy-efficient and sustainable building.

Reducing carbon footprint is a critical issue that affects the environment and our health. Carbon footprint refers to the amount of carbon dioxide (CO2) and other greenhouse gases (GHG) emitted by an individual, organization, or industry. The excessive emission of GHG contributes to global warming, climate change, and air pollution. Therefore, it is essential to adopt sustainable practices and technologies that reduce carbon emissions.

One of the significant contributors to carbon emissions is energy consumption in buildings. According to the US Energy Information Administration, buildings consume 40% of the energy in the United States and produce 40% of CO2 emissions. HVAC systems account for a significant portion of energy consumption in buildings, and their energy consumption can be reduced by installing eFlow-CAR.

eFlow-CAR works by regulating the airflow rate in HVAC systems based on the pressure difference between the supply and return air ducts. The pressure difference is measured by a sensor installed in the ducts, and the regulator adjusts the damper position to maintain a constant airflow rate. By maintaining a constant airflow rate, the energy consumption of HVAC systems can be reduced, and the efficiency of the system can be improved.

eFlow-CAR can also help in reducing the maintenance and operating costs of HVAC systems. HVAC systems often consume more energy than required when the airflow rate is not regulated properly, leading to increased wear and tear on the system components. By maintaining a constant airflow rate, the HVAC system components can operate at their optimal level, reducing the frequency of maintenance and repair.

Installing eFlow-CAR can also help in reducing the carbon footprint of buildings by reducing energy consumption and GHG emissions. By reducing energy consumption, the carbon emissions associated with the generation of electricity can be minimized. Furthermore, by improving the efficiency of HVAC systems, the need for new power plants can be reduced, which would further reduce carbon emissions.

In conclusion, installing eFlow-constant airflow regulators in HVAC systems is an effective way to reduce energy consumption, improve efficiency, and reduce carbon emissions. The use of eFlow-CAR is an excellent example of how innovative technologies can contribute to sustainable development and a greener future. It is essential to adopt such sustainable practices and technologies to reduce our carbon footprint and protect our environment for future generations.

photo source- https://sites.ndtv.com/breathe-clean/how-green-buildings-can-reduce-your-carbon-footprint
April 9, 2023 BY
IN eFlow USA, eFlow USA Projects, Featured eFlow USA Projects

100 Claremont Ave, New York, NY

Installation of eFlow-Constant Airflow Regulators is complete at Claremont Hall!

Claremont Hall located at 100 Claremont Ave is a luxury mixed-use academic and residential building adjacent to the Columbia University campus in the heart of Manhattan’s Morningside Heights neighborhood.

Developed by Lendlease and L+M Development Partners and designed by Robert A.M. Stern Architects and SLCE Architects, this 41 story building offers 165 units  of modern living spaces with high-end amenities and features.

This building was designed as a sustainable building, utilizing the latest technologies and leading the way to reducing carbon footprint.  As a result Claremont Hall earned LEED Certification.

One of the innovative technologies installed in the building during its construction was the eFlow-Constant Airflow regulator. eFlow-CARs were installed in each of the building’s residential units, allowing for continuous ventilation and ensuring a healthy indoor environment for residents.

The eFlow-Constant Airflow Regulator is a cutting-edge device that ensures consistent airflow in a building’s ventilation system, regardless of external factors such as wind or pressure changes. This ensures that the indoor air quality remains consistent, even in high-rise buildings like 100 Claremont Ave, which are more susceptible to fluctuations in air pressure.

By installing eFlow-Constant Airflow Regulators, 100 Claremont Ave provides its residents with several benefits, including improved indoor air quality, reduced energy consumption, and increased cost savings. The regulators help to maintain a consistent temperature throughout the building, which reduces the need for heating and cooling systems, resulting in energy savings and lower utility bills.

Additionally, the eFlow-Constant Airflow Regulators help to prevent the build-up of harmful pollutants and allergens in the air, which can be particularly problematic for individuals with respiratory issues. This results in a healthier and more comfortable indoor environment for all residents.

Overall, the construction of 100 Claremont Ave has been a significant milestone for the neighborhood and has raised the bar for luxury living in the city. With its modern amenities, high-end finishes, and prime location, the building offers a premium living experience that is sure to impress even the most discerning residents and visitors. And with the installation of eFlow-Constant Airflow Regulators, the building offers a healthier and more energy-efficient environment for its residents, demonstrating the commitment of the developers to sustainability and innovation in construction.

Lendlease is the general contractor for this project. Installation of eFlow-Products was undertaken by Centrifugal Associates Group. The manufacturers representative, SRS Enterprises, Inc,  facilitated the sale of eFlow products for this project. Photo credit Michael Young.

This project’s is set to be complete in 2023.

Visit eflowshop.net for product information and pricing or email [email protected]

 

Flow-CAR FACTS

eFlow-CAR is a simple solution to balancing ventilation systems. Constant Airflow Regulator is a device that automatically regulates airflows in ventilation systems to constant levels. The passive control element responds to duct pressure, and requires no electric sensors, pneumatic sensors or controls. eFlow-CARs promote high indoor air quality and energy savings.

  • UL 2043 Classified
  • Composed of fire resistant UL 94 ABS plastic
  • Diameters offered: 3”, 4″, 5”, 6”, 8″, 10″
  • Operating Pressure Range: 0.08 to 2.4 in w.g. (20-600Pa)
  • Airflow settings: 15-765 CFM
  • Temperature Limits: -22° to 140°F (-30° to 60°C)
  • Suitable for both supply and exhaust applications
  • No external power supply needed
  • Field Adjustable CFM set point
  • Capable of maintaining constant airflow within +- 5% for nominal airflow throughout the target operating pressure range of 0.08 to 2.4 in.
  • Standard for Energy Efficient Compliance

 

 

constant-airflow-regulato

 

 

 

 

 

 

Supprier to American Aldes assemblies: ccar-ii, car-iia, ccar-ii-lp, car-ii-hp, car-fea-ii, car-fsa-ii, cer-s-ii, cer-r-ii, cer-lp-sii, cer-lp-r-ii, cer-s-iir, cer-lp-s-iir, cer-fea-ii, cer-fea-iir, cer-lp-fea-ii, cer-lp-fea-iir, csr-s-ii, csr-r-ii, csr-lp-s-ii, csr-lp-r-ii, csr-s-iir, csr-lp-s-iir, csr-fsa-ii, csr-fsa-iir, csr-lp-fsa-ii, csr-lp-fsa-iir, cerb-ws-ii, cerb-wb-ii, cerb-cs-ii, cerb-cfs-ii, cerb-cfb-ii, csrb-ws-ii, csrb-wb-ii, csrb-cs-ii, csrb-cfs-ii, csrb-cfb-ii, Constant Exhaust Registers, Constant Supply Registers, Constant Exhaust Register Box, Constant Supply Register Box, zone register terminals, zrt, zrt-s, zrt-fr, zrt-frs, zrt-w, zrt-ws, zrt-w-fr, zrt-w-frs, zrt-il, zrt-pdil, zrt-pdil-hp, zrt-3pdil, zrt-3pdil-hp, zrt-sdil, zrt-sdil-1-hp

Aldes, American Aldes, car ii, car iia, car ii lp, car ii hp, car fea ii, car fsa ii, cer s ii, cer r ii, cer lp sii, cer lp r ii, cer s iir, cer lp s iir, cer fea ii, cer fea iir, cer lp fea ii, cer lp fea iir, csr s ii, csr r ii, csr lp s ii, csr lp r ii, csr s iir, csr lp s iir, csr fsa ii, csr fsa iir, csr lp fsa ii, csr lp fsa iir, cerb ws ii, cerb wb ii, cerb cs ii, cerb cfs ii, cerb cfb ii, csrb ws ii, csrb wb ii, csrb cs ii, csrb cfs ii, csrb cfb ii, zrt s, zrt fr, zrt frs, zrt w, zrt ws, zrt w fr, zrt w frs, zrt il, zrt pdil, zrt pdil hp, zrt 3pdil, zrt 3pdil hp, zrt sdil, zrt sdil 1 hp

United enertech precision flow system crb-10-s, crb 10 s, crb-10-e, crb 10 e, crb-10-e-cd, crb 10 e cd, crb-10-s-cd, crb 10 s cd, crb-10-e-cd, crb 10 e cd, united enertech precision flow model cr, precision flow model cr-lp, precision flow model cr-hp, young regulator cvr constant volume regulator ,model cvrf5, model cvr8, cvp plus enh

nailor constant volume regulator CVR-SP, CVR-LP, CVR-HP, CVR-T, CVR-GM, CVR-FD

eFlow CAR can be used as equivalent to aldes CAR3, CAR3-s, CER3-S, CER3-R, CER3-S-F, CSR3-S, CSR3-R, CSR3-S-F, CEB3-WS, CEB3-WB, CEB3-CS, CEB3-CS-F, CSB3-WS, CSB3-WB, CSB3-CS, CSB3-CS-F

 
April 2, 2023 BY
IN eFlow USA, eFlow USA Projects

New York Cluster Apartments, Brooklyn, NY

In a bid to promote energy efficiency and improve indoor air quality, eFlow Constant Airflow Regulators have been installed in the New York Cluster Apartments, located at 190 Essex Street, 221 Vermont Street, and 581 Belmont Avenue in Cypress Hills, Brooklyn.  These three newly constructed three-story residential buildings, designed by Delacour, Ferrara & Church Architects, provide a total of 42 units.

eFlow-CARs 3″ at 25 CFM were installed at every apartment exhaust. The installation of the eFlow Constant Airflow Regulators is part of the Neighborhood Construction Program (NCP) and Low-Income Housing Tax Credit program of the New York City Department of Housing Preservation and Development. eFlow-CARs help to maintain a constant airflow, which enhances the building’s overall ventilation performance and improves indoor air quality.

The implementation of the eFlow Constant Airflow Regulators in the New York Cluster Apartments is a significant step towards achieving energy efficiency and sustainability in the affordable housing sector. The New York City Department of Housing Preservation and Development hopes that this initiative will inspire other developers to adopt similar technologies to promote healthier and more energy-efficient homes.

photo credit:Delacour, Ferrara & Church Architects

Installation of eFlow-CAR was undertaken by Remediation Specialists Inc (RSI).

Flow-CAR FACTS

eFlow-CAR is a simple solution to balancing ventilation systems. Constant Airflow Regulator is a device that automatically regulates airflows in ventilation systems to constant levels. The passive control element responds to duct pressure, and requires no electric sensors, pneumatic sensors or controls. eFlow-CARs promote high indoor air quality and energy savings.

  • UL 2043 Classified
  • Composed of fire resistant UL 94 ABS plastic
  • Diameters offered: 3”, 4″, 5”, 6”, 8″, 10″
  • Operating Pressure Range: 0.08 to 2.4 in w.g. (20-600Pa)
  • Airflow settings: 15-765 CFM
  • Temperature Limits: -22° to 140°F (-30° to 60°C)
  • Suitable for both supply and exhaust applications
  • No external power supply needed
  • Field Adjustable CFM set point
  • Capable of maintaining constant airflow within +- 5% for nominal airflow throughout the target operating pressure range of 0.08 to 2.4 in.
  • Standard for Energy Efficient Compliance

Visit eflowshop.net for product information and pricing or email [email protected]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Supprier to American Aldes assemblies: ccar-ii, car-iia, ccar-ii-lp, car-ii-hp, car-fea-ii, car-fsa-ii, cer-s-ii, cer-r-ii, cer-lp-sii, cer-lp-r-ii, cer-s-iir, cer-lp-s-iir, cer-fea-ii, cer-fea-iir, cer-lp-fea-ii, cer-lp-fea-iir, csr-s-ii, csr-r-ii, csr-lp-s-ii, csr-lp-r-ii, csr-s-iir, csr-lp-s-iir, csr-fsa-ii, csr-fsa-iir, csr-lp-fsa-ii, csr-lp-fsa-iir, cerb-ws-ii, cerb-wb-ii, cerb-cs-ii, cerb-cfs-ii, cerb-cfb-ii, csrb-ws-ii, csrb-wb-ii, csrb-cs-ii, csrb-cfs-ii, csrb-cfb-ii, Constant Exhaust Registers, Constant Supply Registers, Constant Exhaust Register Box, Constant Supply Register Box, zone register terminals, zrt, zrt-s, zrt-fr, zrt-frs, zrt-w, zrt-ws, zrt-w-fr, zrt-w-frs, zrt-il, zrt-pdil, zrt-pdil-hp, zrt-3pdil, zrt-3pdil-hp, zrt-sdil, zrt-sdil-1-hp

Aldes, American Aldes, car ii, car iia, car ii lp, car ii hp, car fea ii, car fsa ii, cer s ii, cer r ii, cer lp sii, cer lp r ii, cer s iir, cer lp s iir, cer fea ii, cer fea iir, cer lp fea ii, cer lp fea iir, csr s ii, csr r ii, csr lp s ii, csr lp r ii, csr s iir, csr lp s iir, csr fsa ii, csr fsa iir, csr lp fsa ii, csr lp fsa iir, cerb ws ii, cerb wb ii, cerb cs ii, cerb cfs ii, cerb cfb ii, csrb ws ii, csrb wb ii, csrb cs ii, csrb cfs ii, csrb cfb ii, zrt s, zrt fr, zrt frs, zrt w, zrt ws, zrt w fr, zrt w frs, zrt il, zrt pdil, zrt pdil hp, zrt 3pdil, zrt 3pdil hp, zrt sdil, zrt sdil 1 hp

United enertech precision flow system crb-10-s, crb 10 s, crb-10-e, crb 10 e, crb-10-e-cd, crb 10 e cd, crb-10-s-cd, crb 10 s cd, crb-10-e-cd, crb 10 e cd, united enertech precision flow model cr, precision flow model cr-lp, precision flow model cr-hp, young regulator cvr constant volume regulator ,model cvrf5, model cvr8, cvp plus enh

nailor constant volume regulator CVR-SP, CVR-LP, CVR-HP, CVR-T, CVR-GM, CVR-FD

eFlow CAR can be used as equivalent to aldes CAR3, CAR3-s, CER3-S, CER3-R, CER3-S-F, CSR3-S, CSR3-R, CSR3-S-F, CEB3-WS, CEB3-WB, CEB3-CS, CEB3-CS-F, CSB3-WS, CSB3-WB, CSB3-CS, CSB3-CS-F

 

 

 

 

 

 
March 26, 2023 BY
IN eFlow USA, eFlow USA Projects, Featured eFlow USA Projects

63 Pitt Street, New York, NY

New Residential Building at 63 Pitt Street on Manhattan’s Lower East Side Features eFlow-Constant Airflow Regulators for Improved Indoor Air Quality and Energy Efficiency.

A newly completed 12-story residential building located at 63 Pitt Street on Manhattan’s Lower East Side features cutting-edge eFlow-Constant Airflow Regulators for automatically balanced ventilation, ensuring improved indoor air quality and energy efficiency for its 59 rental apartments. The building, designed by Frank Quatela Architects and developed by Paul Stallings of 6 Strong Realty LLC, includes 18 homes designated for affordable housing, providing much-needed housing options for the community. The property was built in 2022, with First Standard Construction serving as the general contractor.

The eFlow Constant Airflow Regulators, which were installed throughout the building, are designed to ensure that each apartment has consistent airflow and ventilation, even as conditions within the building and individual units change. This helps to maintain a comfortable living environment while also improving indoor air quality and energy efficiency. The technology is particularly important in high-rise buildings, where air pressure differences can create imbalances in airflow. eFlow-CAR’s  3″ and 4″ were installed utilizing custom 6″ x 6″  and 8″ x 8″ CAR mounting plate for exhaust application.

The manufacturers representative, Mechanical Technologies,  facilitated the sale of eFlow products for this project.

Photo credit Frank Quatela Architects

 

Flow-CAR FACTS

eFlow-CAR is a simple solution to balancing ventilation systems. Constant Airflow Regulator is a device that automatically regulates airflows in ventilation systems to constant levels. The passive control element responds to duct pressure, and requires no electric sensors, pneumatic sensors or controls. eFlow-CARs promote high indoor air quality and energy savings.

  • UL 2043 Classified
  • Composed of fire resistant UL 94 ABS plastic
  • Diameters offered: 3”, 4″, 5”, 6”, 8″, 10″
  • Operating Pressure Range: 0.08 to 2.4 in w.g. (20-600Pa)
  • Airflow settings: 15-765 CFM
  • Temperature Limits: -22° to 140°F (-30° to 60°C)
  • Suitable for both supply and exhaust applications
  • No external power supply needed
  • Field Adjustable CFM set point
  • Capable of maintaining constant airflow within +- 5% for nominal airflow throughout the target operating pressure range of 0.08 to 2.4 in.
  • Standard for Energy Efficient Compliance

 

Visit eflowshop.net for product information and pricing or email [email protected]

 

 

 

 

 

 

 

 

 

 

 

Supprier to American Aldes assemblies: ccar-ii, car-iia, ccar-ii-lp, car-ii-hp, car-fea-ii, car-fsa-ii, cer-s-ii, cer-r-ii, cer-lp-sii, cer-lp-r-ii, cer-s-iir, cer-lp-s-iir, cer-fea-ii, cer-fea-iir, cer-lp-fea-ii, cer-lp-fea-iir, csr-s-ii, csr-r-ii, csr-lp-s-ii, csr-lp-r-ii, csr-s-iir, csr-lp-s-iir, csr-fsa-ii, csr-fsa-iir, csr-lp-fsa-ii, csr-lp-fsa-iir, cerb-ws-ii, cerb-wb-ii, cerb-cs-ii, cerb-cfs-ii, cerb-cfb-ii, csrb-ws-ii, csrb-wb-ii, csrb-cs-ii, csrb-cfs-ii, csrb-cfb-ii, Constant Exhaust Registers, Constant Supply Registers, Constant Exhaust Register Box, Constant Supply Register Box, zone register terminals, zrt, zrt-s, zrt-fr, zrt-frs, zrt-w, zrt-ws, zrt-w-fr, zrt-w-frs, zrt-il, zrt-pdil, zrt-pdil-hp, zrt-3pdil, zrt-3pdil-hp, zrt-sdil, zrt-sdil-1-hp

Aldes, American Aldes, car ii, car iia, car ii lp, car ii hp, car fea ii, car fsa ii, cer s ii, cer r ii, cer lp sii, cer lp r ii, cer s iir, cer lp s iir, cer fea ii, cer fea iir, cer lp fea ii, cer lp fea iir, csr s ii, csr r ii, csr lp s ii, csr lp r ii, csr s iir, csr lp s iir, csr fsa ii, csr fsa iir, csr lp fsa ii, csr lp fsa iir, cerb ws ii, cerb wb ii, cerb cs ii, cerb cfs ii, cerb cfb ii, csrb ws ii, csrb wb ii, csrb cs ii, csrb cfs ii, csrb cfb ii, zrt s, zrt fr, zrt frs, zrt w, zrt ws, zrt w fr, zrt w frs, zrt il, zrt pdil, zrt pdil hp, zrt 3pdil, zrt 3pdil hp, zrt sdil, zrt sdil 1 hp

United enertech precision flow system crb-10-s, crb 10 s, crb-10-e, crb 10 e, crb-10-e-cd, crb 10 e cd, crb-10-s-cd, crb 10 s cd, crb-10-e-cd, crb 10 e cd, united enertech precision flow model cr, precision flow model cr-lp, precision flow model cr-hp, young regulator cvr constant volume regulator ,model cvrf5, model cvr8, cvp plus enh

nailor constant volume regulator CVR-SP, CVR-LP, CVR-HP, CVR-T, CVR-GM, CVR-FD

eFlow CAR can be used as equivalent to aldes CAR3, CAR3-s, CER3-S, CER3-R, CER3-S-F, CSR3-S, CSR3-R, CSR3-S-F, CEB3-WS, CEB3-WB, CEB3-CS, CEB3-CS-F, CSB3-WS, CSB3-WB, CSB3-CS, CSB3-CS-F

 

 

 

(more…)
March 26, 2023 BY
IN eFlow USA, eFlow USA Projects, Featured eFlow USA Projects

200 East 34th Street, New York, NY

We are thrilled to unveil another project, showcasing the e2Flow® PLUS system – a revolutionary alternative solution to ZRT. This pioneering system has been meticulously designed to offer sustainable, flexible, and efficient airflow balancing at a cost-effective price point. With state-of-the-art technology and an unwavering commitment to excellence, this project marks a significant milestone for both our company and the industry as a whole.

The construction of a 34-story residential tower at 200 East 34th Street, NYC, has now reached completion. Boasting a range of cutting-edge features, including eFlow-CARs and the innovative e2Flow PLUS system.

e2Flow PLUS system installed allows for controlled airflow at minimum 50 CFM and on demand maximum 450 CFM. eFlow-CARs 5″  at 30 CFM were utilized for all exhaust applications.

This impressive building was designed by CetraRuddy Architecture and developed by 200 East 34th LLC. With 144 high-end condominium units spanning across studio to two-bedroom layouts, the 388-foot-tall structure stands as a true architectural masterpiece. The property was expertly constructed by Noble Construction Group. AKF Group  is the MEP engineer on this project.

eFlow collaborated directly with the mechanical contractor to provide guidance on product selection and product approvals. Installation of eFlow-Products was undertaken by L & M Air Inc.

Our unwavering commitment to pushing the limits of what’s possible in our field is exemplified by this project, and we firmly believe that it will leave a lasting impact on the industry. We warmly invite you to discover more about the e2Flow® PLUS system, our latest ZRT alternative solution.

Photo credit CetraRuddy Architecture

Visit eflowshop.net for product information and pricing or email [email protected]

 

Flow-CAR FACTS

eFlow-CAR is a simple solution to balancing ventilation systems. Constant Airflow Regulator is a device that automatically regulates airflows in ventilation systems to constant levels. The passive control element responds to duct pressure, and requires no electric sensors, pneumatic sensors or controls. eFlow-CARs promote high indoor air quality and energy savings.

  • UL 2043 Classified
  • Composed of fire resistant UL 94 ABS plastic
  • Diameters offered: 3”, 4″, 5”, 6”, 8″, 10″
  • Operating Pressure Range: 0.08 to 2.4 in w.g. (20-600Pa)
  • Airflow settings: 15-765 CFM
  • Temperature Limits: -22° to 140°F (-30° to 60°C)
  • Suitable for both supply and exhaust applications
  • No external power supply needed
  • Field Adjustable CFM set point
  • Capable of maintaining constant airflow within +- 5% for nominal airflow throughout the target operating pressure range of 0.08 to 2.4 in.
  • Standard for Energy Efficient Compliance

 

e2Flow® PLUS FACTS (ZRT Alternative Solution)

e2Flow® PLUS system is designed to introduce flexibility and demand control to central ventilation systems. It is used to achieve a combination of low-flow continuous indoor air quality ventilation and on-demand high-flow spot ventilation using the same central fan system. This high efficiency ventilation system promotes high indoor air quality, energy savings and reduces operating costs. This system is used in both large and small systems. Unlike any other product on the market, e2Flow® PLUS offers flexibility in engineering design where system’s components are tailored to the project’s requirements. Combination of two eFlow devices are used to achieve controlled minimum and maximum airflow. e2Flow® PLUS offers simple in-line installation where no mounting hardware or additional support is required.

e2Flow® PLUS is ideal for bathroom, kitchen exhaust, makeup air, new constructions, retrofits and so much more.

  • Achieve a combination of low-flow continues ventilation and on-demand high-flow spot ventilation
  • Mix & Match eFlow products for optimal solution
  • Easy in-line installation
  • No mounting hardware or additional support required
  • Low installation cost
  • Refer to schematic for installation illustration

 

 

 

 

 

 

 

Supprier to American Aldes assemblies: ccar-ii, car-iia, ccar-ii-lp, car-ii-hp, car-fea-ii, car-fsa-ii, cer-s-ii, cer-r-ii, cer-lp-sii, cer-lp-r-ii, cer-s-iir, cer-lp-s-iir, cer-fea-ii, cer-fea-iir, cer-lp-fea-ii, cer-lp-fea-iir, csr-s-ii, csr-r-ii, csr-lp-s-ii, csr-lp-r-ii, csr-s-iir, csr-lp-s-iir, csr-fsa-ii, csr-fsa-iir, csr-lp-fsa-ii, csr-lp-fsa-iir, cerb-ws-ii, cerb-wb-ii, cerb-cs-ii, cerb-cfs-ii, cerb-cfb-ii, csrb-ws-ii, csrb-wb-ii, csrb-cs-ii, csrb-cfs-ii, csrb-cfb-ii, Constant Exhaust Registers, Constant Supply Registers, Constant Exhaust Register Box, Constant Supply Register Box, zone register terminals, zrt, zrt-s, zrt-fr, zrt-frs, zrt-w, zrt-ws, zrt-w-fr, zrt-w-frs, zrt-il, zrt-pdil, zrt-pdil-hp, zrt-3pdil, zrt-3pdil-hp, zrt-sdil, zrt-sdil-1-hp

Aldes, American Aldes, car ii, car iia, car ii lp, car ii hp, car fea ii, car fsa ii, cer s ii, cer r ii, cer lp sii, cer lp r ii, cer s iir, cer lp s iir, cer fea ii, cer fea iir, cer lp fea ii, cer lp fea iir, csr s ii, csr r ii, csr lp s ii, csr lp r ii, csr s iir, csr lp s iir, csr fsa ii, csr fsa iir, csr lp fsa ii, csr lp fsa iir, cerb ws ii, cerb wb ii, cerb cs ii, cerb cfs ii, cerb cfb ii, csrb ws ii, csrb wb ii, csrb cs ii, csrb cfs ii, csrb cfb ii, zrt s, zrt fr, zrt frs, zrt w, zrt ws, zrt w fr, zrt w frs, zrt il, zrt pdil, zrt pdil hp, zrt 3pdil, zrt 3pdil hp, zrt sdil, zrt sdil 1 hp

United enertech precision flow system crb-10-s, crb 10 s, crb-10-e, crb 10 e, crb-10-e-cd, crb 10 e cd, crb-10-s-cd, crb 10 s cd, crb-10-e-cd, crb 10 e cd, united enertech precision flow model cr, precision flow model cr-lp, precision flow model cr-hp, young regulator cvr constant volume regulator ,model cvrf5, model cvr8, cvp plus enh

nailor constant volume regulator CVR-SP, CVR-LP, CVR-HP, CVR-T, CVR-GM, CVR-FD

eFlow CAR can be used as equivalent to aldes CAR3, CAR3-s, CER3-S, CER3-R, CER3-S-F, CSR3-S, CSR3-R, CSR3-S-F, CEB3-WS, CEB3-WB, CEB3-CS, CEB3-CS-F, CSB3-WS, CSB3-WB, CSB3-CS, CSB3-CS-F

 
March 17, 2023 BY
IN eFlow USA Projects, Featured eFlow USA Projects

344 East 28th Street, New York, NY

Another NYCHA building to install eFlow-Constant Airflow Regulators!

344 East 28th Street is a towering residential complex located in New York City, comprising 26 floors and 225 units ranging from 1 to 4 bedrooms. Built in 1971, it is home to around 450 residents who primarily fall under the low- and extremely-low-income bracket.

This building is part of The New York City Housing Authority (NYCHA) which is a government agency that provides affordable housing to low- and moderate-income New Yorkers. It is the largest public housing authority in North America, serving over 400,000 residents in over 300 developments across the five boroughs of New York City.

As with most multi-unit buildings, energy conservation is a primary concern for 344 East 28th Street. To address this issue, eFlow Constant Airflow Regulators were installed to ensure the proper balance of ventilation and reduce energy usage. To facilitate this installation, eFlow provided custom 6”x4” mounting plates to accommodate 3” CAR at 25 CFM as well as 6″x4″ fire dampers in every apartment exhaust.

The project’s architectural design was led by SLM Architecture, while Monadnock Construction assumed the role of general contractor. The MEP engineering work was handled by Dagher Engineering, while eFlow collaborates with Rehab and Design Construction Corp. to provide eFlow products for the project. The installation of eFlow-CARs was undertaken by Rehab and Design Construction Corp. Photo credit John W. Cahill

Visit eflowshop.net for product information and pricing or email [email protected]

 

About eFlow-CAR

eFlow-Constant Airflow Regulator (CAR) is a low-cost solution for balancing ventilation systems, eliminating the need for on-site balancing and ongoing maintenance. The Constant Airflow Regulator’s control of airflow is essential to optimize energy consumption while providing good air quality. eFlow-CARs are  UL 2043 Classified (R38307) devices that automatically adjust to environmental changes in stack pressure and accurately regulate airflow. Constant Airflow Regulators are self-regulating and adjustable flow-regulators used in commercial and residential buildings. The desired airflow is fixed by a screwdriver. It is automatically calibrated to varying pressures without the need for electricity. Constant Airflow Regulators save energy by precisely controlling airflow into or out of a space. This is accomplished regardless of static pressure while providing good air quality.

eFlow-CAR FACTS

  • UL 2043 Classified
  • Composed of fire resistant UL 94 ABS plastic
  • Diameters offered: 3”, 4″, 5”, 6”, 8″, 10″
  • Operating Pressure Range: 0.08 to 2.4 in w.g. (20-600Pa)
  • Airflow settings: 15-765 CFM
  • Temperature Limits: -22° to 140°F (-30° to 60°C)
  • Suitable for both supply and exhaust applications
  • No external power supply needed
  • Field Adjustable CFM set point
  • Capable of maintaining constant airflow within +- 5% for nominal airflow throughout the target operating pressure range of 0.08 to 2.4 in.
  • Standard for Energy Efficient Compliance

 

Visit eflowshop.net for product information and pricing or email [email protected]

 

 

 

constant-airflow-regulator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Supprier to American Aldes assemblies: ccar-ii, car-iia, ccar-ii-lp, car-ii-hp, car-fea-ii, car-fsa-ii, cer-s-ii, cer-r-ii, cer-lp-sii, cer-lp-r-ii, cer-s-iir, cer-lp-s-iir, cer-fea-ii, cer-fea-iir, cer-lp-fea-ii, cer-lp-fea-iir, csr-s-ii, csr-r-ii, csr-lp-s-ii, csr-lp-r-ii, csr-s-iir, csr-lp-s-iir, csr-fsa-ii, csr-fsa-iir, csr-lp-fsa-ii, csr-lp-fsa-iir, cerb-ws-ii, cerb-wb-ii, cerb-cs-ii, cerb-cfs-ii, cerb-cfb-ii, csrb-ws-ii, csrb-wb-ii, csrb-cs-ii, csrb-cfs-ii, csrb-cfb-ii, Constant Exhaust Registers, Constant Supply Registers, Constant Exhaust Register Box, Constant Supply Register Box, zone register terminals, zrt, zrt-s, zrt-fr, zrt-frs, zrt-w, zrt-ws, zrt-w-fr, zrt-w-frs, zrt-il, zrt-pdil, zrt-pdil-hp, zrt-3pdil, zrt-3pdil-hp, zrt-sdil, zrt-sdil-1-hp

Aldes, American Aldes, car ii, car iia, car ii lp, car ii hp, car fea ii, car fsa ii, cer s ii, cer r ii, cer lp sii, cer lp r ii, cer s iir, cer lp s iir, cer fea ii, cer fea iir, cer lp fea ii, cer lp fea iir, csr s ii, csr r ii, csr lp s ii, csr lp r ii, csr s iir, csr lp s iir, csr fsa ii, csr fsa iir, csr lp fsa ii, csr lp fsa iir, cerb ws ii, cerb wb ii, cerb cs ii, cerb cfs ii, cerb cfb ii, csrb ws ii, csrb wb ii, csrb cs ii, csrb cfs ii, csrb cfb ii, zrt s, zrt fr, zrt frs, zrt w, zrt ws, zrt w fr, zrt w frs, zrt il, zrt pdil, zrt pdil hp, zrt 3pdil, zrt 3pdil hp, zrt sdil, zrt sdil 1 hp

United enertech precision flow system crb-10-s, crb 10 s, crb-10-e, crb 10 e, crb-10-e-cd, crb 10 e cd, crb-10-s-cd, crb 10 s cd, crb-10-e-cd, crb 10 e cd, united enertech precision flow model cr, precision flow model cr-lp, precision flow model cr-hp, young regulator cvr constant volume regulator ,model cvrf5, model cvr8, cvp plus enh

eFlow CAR can be used as equivalent to aldes CAR3, CAR3-s, CER3-S, CER3-R, CER3-S-F, CSR3-S, CSR3-R, CSR3-S-F, CEB3-WS, CEB3-WB, CEB3-CS, CEB3-CS-F, CSB3-WS, CSB3-WB, CSB3-CS, CSB3-CS-F
January 29, 2023 BY
IN eFlow USA, eFlow USA Projects, Featured eFlow USA Projects

200 East 83rd Street, New York, NY

We are proud to announce our latest project featuring e2Flow® PLUS system, the new ZRT alternative solution. This innovative solution is designed to provide a sustainable, cost-effective, flexiable  and efficient solution to controlled airflow balancing. With cutting-edge technology and a commitment to excellence, this project represents a major step forward for our company and the industry as a whole.

200 East 83rd street is a residential tower designed by Robert A.M. Stern Architects, developed by Naftali Group and Rockefeller Group. Situated on Manhattan’s Upper East Side, the 35 story tower features 100% sold 86-unit luxury residence. This building offers state-of-the-art technology and sustainability features which include eFlow-Constant Airflow Regulators (CARs) as well as e2Flow® PLUS system, the new ZRT alternative solution.  The aim is to provide tenants with a comfortable, efficient, and healthy living.

SLCE Architects is executive architect, Leeding Builders Group is the general contractor for the project, WSP is the structural engineer and AKF Group  is the MEP engineer on record. Installation of eFlow-Products was undertaken by Centrifugal Associates Group. eFlow rep was on job site numerous times to ensure successful e2Flow PLUS system installation.

The manufacturers representative, SRS Enterprises, Inc,  facilitated the sale of eFlow products for this project.

This project is a testament to our dedication to pushing the boundaries of what is possible in our field, and we are confident that it will have a significant impact on the industry. We invite you to learn more about about e2Flow® PLUS system, the new ZRT alternative solution.

Visit eflowshop.net for product information and pricing or email [email protected]

 

Flow-CAR FACTS

eFlow-CAR is a simple solution to balancing ventilation systems. Constant Airflow Regulator is a device that automatically regulates airflows in ventilation systems to constant levels. The passive control element responds to duct pressure, and requires no electric sensors, pneumatic sensors or controls. eFlow-CARs promote high indoor air quality and energy savings.

  • UL 2043 Classified
  • Composed of fire resistant UL 94 ABS plastic
  • Diameters offered: 3”, 4″, 5”, 6”, 8″, 10″
  • Operating Pressure Range: 0.08 to 2.4 in w.g. (20-600Pa)
  • Airflow settings: 15-765 CFM
  • Temperature Limits: -22° to 140°F (-30° to 60°C)
  • Suitable for both supply and exhaust applications
  • No external power supply needed
  • Field Adjustable CFM set point
  • Capable of maintaining constant airflow within +- 5% for nominal airflow throughout the target operating pressure range of 0.08 to 2.4 in.
  • Standard for Energy Efficient Compliance

 

e2Flow® PLUS FACTS (ZRT Alternative Solution)

e2Flow® PLUS system is designed to introduce flexibility and demand control to central ventilation systems. It is used to achieve a combination of low-flow continuous indoor air quality ventilation and on-demand high-flow spot ventilation using the same central fan system. This high efficiency ventilation system promotes high indoor air quality, energy savings and reduces operating costs. This system is used in both large and small systems. Unlike any other product on the market, e2Flow® PLUS offers flexibility in engineering design where system’s components are tailored to the project’s requirements. Combination of two eFlow devices are used to achieve controlled minimum and maximum airflow. e2Flow® PLUS offers simple in-line installation where no mounting hardware or additional support is required.

e2Flow® PLUS is ideal for bathroom, kitchen exhaust, makeup air, new constructions, retrofits and so much more.

  • Achieve a combination of low-flow continues ventilation and on-demand high-flow spot ventilation
  • Mix & Match eFlow products for optimal solution
  • Easy in-line installation
  • No mounting hardware or additional support required
  • Low installation cost
  • Refer to schematic for installation illustration

 

 

 

 

 

 

 

 

 

 

 

 

 

Supprier to American Aldes assemblies: ccar-ii, car-iia, ccar-ii-lp, car-ii-hp, car-fea-ii, car-fsa-ii, cer-s-ii, cer-r-ii, cer-lp-sii, cer-lp-r-ii, cer-s-iir, cer-lp-s-iir, cer-fea-ii, cer-fea-iir, cer-lp-fea-ii, cer-lp-fea-iir, csr-s-ii, csr-r-ii, csr-lp-s-ii, csr-lp-r-ii, csr-s-iir, csr-lp-s-iir, csr-fsa-ii, csr-fsa-iir, csr-lp-fsa-ii, csr-lp-fsa-iir, cerb-ws-ii, cerb-wb-ii, cerb-cs-ii, cerb-cfs-ii, cerb-cfb-ii, csrb-ws-ii, csrb-wb-ii, csrb-cs-ii, csrb-cfs-ii, csrb-cfb-ii, Constant Exhaust Registers, Constant Supply Registers, Constant Exhaust Register Box, Constant Supply Register Box, zone register terminals, zrt, zrt-s, zrt-fr, zrt-frs, zrt-w, zrt-ws, zrt-w-fr, zrt-w-frs, zrt-il, zrt-pdil, zrt-pdil-hp, zrt-3pdil, zrt-3pdil-hp, zrt-sdil, zrt-sdil-1-hp

Aldes, American Aldes, car ii, car iia, car ii lp, car ii hp, car fea ii, car fsa ii, cer s ii, cer r ii, cer lp sii, cer lp r ii, cer s iir, cer lp s iir, cer fea ii, cer fea iir, cer lp fea ii, cer lp fea iir, csr s ii, csr r ii, csr lp s ii, csr lp r ii, csr s iir, csr lp s iir, csr fsa ii, csr fsa iir, csr lp fsa ii, csr lp fsa iir, cerb ws ii, cerb wb ii, cerb cs ii, cerb cfs ii, cerb cfb ii, csrb ws ii, csrb wb ii, csrb cs ii, csrb cfs ii, csrb cfb ii, zrt s, zrt fr, zrt frs, zrt w, zrt ws, zrt w fr, zrt w frs, zrt il, zrt pdil, zrt pdil hp, zrt 3pdil, zrt 3pdil hp, zrt sdil, zrt sdil 1 hp

United enertech precision flow system crb-10-s, crb 10 s, crb-10-e, crb 10 e, crb-10-e-cd, crb 10 e cd, crb-10-s-cd, crb 10 s cd, crb-10-e-cd, crb 10 e cd, united enertech precision flow model cr, precision flow model cr-lp, precision flow model cr-hp, young regulator cvr constant volume regulator ,model cvrf5, model cvr8, cvp plus enh

nailor constant volume regulator CVR-SP, CVR-LP, CVR-HP, CVR-T, CVR-GM, CVR-FD

eFlow CAR can be used as equivalent to aldes CAR3, CAR3-s, CER3-S, CER3-R, CER3-S-F, CSR3-S, CSR3-R, CSR3-S-F, CEB3-WS, CEB3-WB, CEB3-CS, CEB3-CS-F, CSB3-WS, CSB3-WB, CSB3-CS, CSB3-CS-F

 
January 18, 2023 BY
IN eFlow USA, eFlow USA Projects, Featured eFlow USA Projects

Moxy Bedford Hotel, 353 Bedford, Brooklyn, NY

Moxy Brooklyn Williamsburg hotel located at 353 Bedford Avenue in Brooklyn, NY is yet another hotel to install eFlow-Constant Airflow Regulators (CARs) .

This 11-story, 216-room Moxy Williamsburg hotel  is located just over the Williamsburg Bridge, in the heart of Brooklyn’s vibrant and rapidly growing Williamsburg neighborhood. The lifestyle hotel features intelligently designed rooms, tech-savvy amenities and the latest energy efficiency technology including eFlow-CARs. 5″ eFlow-CARs at 30 CFM in custom 6″x6″ wall mount  box were  installed in every hotel guest-room exhaust to automatically balance airflow, promote high indoor air quality (IAQ) and energy savings for years to come.

This Moxy Hotel was built by Leeding Builders Group, LLC, designed by Stonehill & Taylor Architects, and developed by The Lightstone Group and Marriott.  AMA Group is the MEP engineers for this project.

 

Installation of eFlow-Products was undertaken by Eastern Air Mechanical.

The manufacturers representative, Mechanical Technologies LLC,  facilitated the sale of eFlow products for this project.

 

Flow-CAR FACTS

eFlow-CAR is a simple solution to balancing ventilation systems. Constant Airflow Regulator is a device that automatically regulates airflows in ventilation systems to constant levels. The passive control element responds to duct pressure, and requires no electric sensors, pneumatic sensors or controls. eFlow-CARs promote high indoor air quality and energy savings.

  • UL 2043 Classified
  • Composed of fire resistant UL 94 ABS plastic
  • Diameters offered: 3”, 4″, 5”, 6”, 8″, 10″
  • Operating Pressure Range: 0.08 to 2.4 in w.g. (20-600Pa)
  • Airflow settings: 15-765 CFM
  • Temperature Limits: -22° to 140°F (-30° to 60°C)
  • Suitable for both supply and exhaust applications
  • No external power supply needed
  • Field Adjustable CFM set point
  • Capable of maintaining constant airflow within +- 5% for nominal airflow throughout the target operating pressure range of 0.08 to 2.4 in.
  • Standard for Energy Efficient Compliance

 

Visit eflowshop.net for product information and pricing or email [email protected]

 

 

 

 

 

 

 

 

Supprier to American Aldes assemblies: ccar-ii, car-iia, ccar-ii-lp, car-ii-hp, car-fea-ii, car-fsa-ii, cer-s-ii, cer-r-ii, cer-lp-sii, cer-lp-r-ii, cer-s-iir, cer-lp-s-iir, cer-fea-ii, cer-fea-iir, cer-lp-fea-ii, cer-lp-fea-iir, csr-s-ii, csr-r-ii, csr-lp-s-ii, csr-lp-r-ii, csr-s-iir, csr-lp-s-iir, csr-fsa-ii, csr-fsa-iir, csr-lp-fsa-ii, csr-lp-fsa-iir, cerb-ws-ii, cerb-wb-ii, cerb-cs-ii, cerb-cfs-ii, cerb-cfb-ii, csrb-ws-ii, csrb-wb-ii, csrb-cs-ii, csrb-cfs-ii, csrb-cfb-ii, Constant Exhaust Registers, Constant Supply Registers, Constant Exhaust Register Box, Constant Supply Register Box, zone register terminals, zrt, zrt-s, zrt-fr, zrt-frs, zrt-w, zrt-ws, zrt-w-fr, zrt-w-frs, zrt-il, zrt-pdil, zrt-pdil-hp, zrt-3pdil, zrt-3pdil-hp, zrt-sdil, zrt-sdil-1-hp

Aldes, American Aldes, car ii, car iia, car ii lp, car ii hp, car fea ii, car fsa ii, cer s ii, cer r ii, cer lp sii, cer lp r ii, cer s iir, cer lp s iir, cer fea ii, cer fea iir, cer lp fea ii, cer lp fea iir, csr s ii, csr r ii, csr lp s ii, csr lp r ii, csr s iir, csr lp s iir, csr fsa ii, csr fsa iir, csr lp fsa ii, csr lp fsa iir, cerb ws ii, cerb wb ii, cerb cs ii, cerb cfs ii, cerb cfb ii, csrb ws ii, csrb wb ii, csrb cs ii, csrb cfs ii, csrb cfb ii, zrt s, zrt fr, zrt frs, zrt w, zrt ws, zrt w fr, zrt w frs, zrt il, zrt pdil, zrt pdil hp, zrt 3pdil, zrt 3pdil hp, zrt sdil, zrt sdil 1 hp

United enertech precision flow system crb-10-s, crb 10 s, crb-10-e, crb 10 e, crb-10-e-cd, crb 10 e cd, crb-10-s-cd, crb 10 s cd, crb-10-e-cd, crb 10 e cd, united enertech precision flow model cr, precision flow model cr-lp, precision flow model cr-hp, young regulator cvr constant volume regulator ,model cvrf5, model cvr8, cvp plus enh

nailor constant volume regulator CVR-SP, CVR-LP, CVR-HP, CVR-T, CVR-GM, CVR-FD

eFlow CAR can be used as equivalent to aldes CAR3, CAR3-s, CER3-S, CER3-R, CER3-S-F, CSR3-S, CSR3-R, CSR3-S-F, CEB3-WS, CEB3-WB, CEB3-CS, CEB3-CS-F, CSB3-WS, CSB3-WB, CSB3-CS, CSB3-CS-F

 

 

 
January 5, 2023 BY
IN eFlow USA, eFlow USA Projects, Featured eFlow USA Projects

Melrose North, 341 E. 162nd Street, Bronx, NY

eFlow is honored to take part in yet another Passive House building project!  

eFlow-Constant Airflow Regulators (CARs) were installed at Melrose North building located at 341 E. 162nd street in the South Bronx, NY. eFlow worked directly with Air Craft Air Conditioning, the Mechanical Contractor for this project, to supply Constant Airflow Regulators (CARs) that are economical, efficient and backed by our unsurpassed customer service. Rendering photo provided courtesy of Curtis + Ginsberg Architects.

About Melrose North

Designed to Passive House and LEED Gold standards, Melrose North will significantly reduce environmental impact and provide a healthy living environment. The specifications for this building will meet community goals and will ensure that the project will remain financially viable in the long-term. Steven Winter Associates, Inc. is providing consulting and verification services to help meet Passive House, LEEDv4 standards and requirements. This includes ensuring primary energy conservation measurements; 1.solar photovoltaics 2.optimized hydronic heating 3.unique window design 4.energy recovery ventilation. Installation of eFlow -Constant Airflow Regulators is a proven measure to help meet standards for successful Passive House and LEED certification by ensuring that the building achieves optimal energy recovery ventilation.

This 154, 500 SF project is being developed  through a partnership between  Bronx Pro Group and the New York City Housing Authority (NYCHA). This development will provide 171 units of supportive and affordable housing, 103 units of which will be set aside for homeless households. The remaining 67 units will be allocated to  households earning at or below 80 percent of area median income. Curtis + Ginsberg Architects is responsible for the design of the 14-story building, which will include 51 studio apartments, 53 one-bedroom apartments, 55 two-bedroom apartments, and 11 three-bedroom apartments. There will be one additional unit for a live-in superintendent. Skyline Engineering is the MEP design engineer for this project.

About eFlow-CAR

eFlow-Constant Airflow Regulator (CAR) is a low-cost solution for balancing ventilation systems, eliminating the need for on-site balancing and ongoing maintenance. The Constant Airflow Regulator’s control of airflow is essential to optimize energy consumption while providing good air quality. eFlow-CARs are  UL 2043 Classified (R38307) devices that automatically adjust to environmental changes in stack pressure and accurately regulate airflow. Constant Airflow Regulators are self-regulating and adjustable flow-regulators used in commercial and residential buildings. The desired airflow is fixed by a screwdriver. It is automatically calibrated to varying pressures without the need for electricity. Constant Airflow Regulators save energy by precisely controlling airflow into or out of a space. This is accomplished regardless of static pressure while providing good air quality.

eFlow-CAR FACTS

  • UL 2043 Classified
  • Composed of fire resistant UL 94 ABS plastic
  • Diameters offered: 3”, 4″, 5”, 6”, 8″, 10″
  • Operating Pressure Range: 0.08 to 2.4 in w.g. (20-600Pa)
  • Airflow settings: 15-765 CFM
  • Temperature Limits: -22° to 140°F (-30° to 60°C)
  • Suitable for both supply and exhaust applications
  • No external power supply needed
  • Field Adjustable CFM set point
  • Capable of maintaining constant airflow within +- 5% for nominal airflow throughout the target operating pressure range of 0.08 to 2.4 in.
  • Standard for Energy Efficient Compliance

 

Visit eflowshop.net for product information and pricing or email [email protected]

 

 

 

constant-airflow-regulator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Supprier to American Aldes assemblies: ccar-ii, car-iia, ccar-ii-lp, car-ii-hp, car-fea-ii, car-fsa-ii, cer-s-ii, cer-r-ii, cer-lp-sii, cer-lp-r-ii, cer-s-iir, cer-lp-s-iir, cer-fea-ii, cer-fea-iir, cer-lp-fea-ii, cer-lp-fea-iir, csr-s-ii, csr-r-ii, csr-lp-s-ii, csr-lp-r-ii, csr-s-iir, csr-lp-s-iir, csr-fsa-ii, csr-fsa-iir, csr-lp-fsa-ii, csr-lp-fsa-iir, cerb-ws-ii, cerb-wb-ii, cerb-cs-ii, cerb-cfs-ii, cerb-cfb-ii, csrb-ws-ii, csrb-wb-ii, csrb-cs-ii, csrb-cfs-ii, csrb-cfb-ii, Constant Exhaust Registers, Constant Supply Registers, Constant Exhaust Register Box, Constant Supply Register Box, zone register terminals, zrt, zrt-s, zrt-fr, zrt-frs, zrt-w, zrt-ws, zrt-w-fr, zrt-w-frs, zrt-il, zrt-pdil, zrt-pdil-hp, zrt-3pdil, zrt-3pdil-hp, zrt-sdil, zrt-sdil-1-hp

Aldes, American Aldes, car ii, car iia, car ii lp, car ii hp, car fea ii, car fsa ii, cer s ii, cer r ii, cer lp sii, cer lp r ii, cer s iir, cer lp s iir, cer fea ii, cer fea iir, cer lp fea ii, cer lp fea iir, csr s ii, csr r ii, csr lp s ii, csr lp r ii, csr s iir, csr lp s iir, csr fsa ii, csr fsa iir, csr lp fsa ii, csr lp fsa iir, cerb ws ii, cerb wb ii, cerb cs ii, cerb cfs ii, cerb cfb ii, csrb ws ii, csrb wb ii, csrb cs ii, csrb cfs ii, csrb cfb ii, zrt s, zrt fr, zrt frs, zrt w, zrt ws, zrt w fr, zrt w frs, zrt il, zrt pdil, zrt pdil hp, zrt 3pdil, zrt 3pdil hp, zrt sdil, zrt sdil 1 hp

United enertech precision flow system crb-10-s, crb 10 s, crb-10-e, crb 10 e, crb-10-e-cd, crb 10 e cd, crb-10-s-cd, crb 10 s cd, crb-10-e-cd, crb 10 e cd, united enertech precision flow model cr, precision flow model cr-lp, precision flow model cr-hp, young regulator cvr constant volume regulator ,model cvrf5, model cvr8, cvp plus enh

eFlow CAR can be used as equivalent to aldes CAR3, CAR3-s, CER3-S, CER3-R, CER3-S-F, CSR3-S, CSR3-R, CSR3-S-F, CEB3-WS, CEB3-WB, CEB3-CS, CEB3-CS-F, CSB3-WS, CSB3-WB, CSB3-CS, CSB3-CS-F
December 14, 2022 BY
IN eFlow USA, eFlow USA Projects, Featured eFlow USA Projects

8 Court Square, Long Island City, NY

8 Court Square building is nearly complete and features variety of eFlow-products for automatically balanced and controlled ventilation.

8 Court Square is a 20-story residential tower located at 27-10 44th Drive in Long Island City, NY. This 224-foot-tall structure will yield 107,377 square feet of residential space spread across 157 units, as well as 10,170 square feet for commercial space.

eFlow-CARs 4″ at 25 CFM were installed in every apartment exhaust. eFlow-CAR 6″ high pressure (0.6″w.c.-2.4″w.c.) at  125 CFM in wall mount fire damper assemblies were utilized for supply application. e2Flow PLUS system was installed to control on demand high airflow. e2Flow PLUS is exclusive to eFlow and it’s used as ZRT alternative solution.

8 Court Square was developed by 25-34 Jackson Avenue Property Owner LLC, designed by Hill West Architects and Cauldwell Wingate Company is the general contractor on record. Installation of eFlow-Products was undertaken by PI mechanical.

The manufacturers representative, SRS Enterprises, Inc,  facilitated the sale of eFlow products for this project.

8 Court Square is expected to be completed  in 2023.

 

Flow-CAR FACTS

eFlow-CAR is a simple solution to balancing ventilation systems. Constant Airflow Regulator is a device that automatically regulates airflows in ventilation systems to constant levels. The passive control element responds to duct pressure, and requires no electric sensors, pneumatic sensors or controls. eFlow-CARs promote high indoor air quality and energy savings.

  • UL 2043 Classified
  • Composed of fire resistant UL 94 ABS plastic
  • Diameters offered: 3”, 4″, 5”, 6”, 8″, 10″
  • Operating Pressure Range: 0.08 to 2.4 in w.g. (20-600Pa)
  • Airflow settings: 15-765 CFM
  • Temperature Limits: -22° to 140°F (-30° to 60°C)
  • Suitable for both supply and exhaust applications
  • No external power supply needed
  • Field Adjustable CFM set point
  • Capable of maintaining constant airflow within +- 5% for nominal airflow throughout the target operating pressure range of 0.08 to 2.4 in.
  • Standard for Energy Efficient Compliance

 

Flow-CAR Fire Damper Assembly FACTS 

eFlow-CAR is inserted in a heavy-gauge galvanized steel enclosure that is designed to accommodate installation of fire damper and standard aluminum grille. eFlow-CAR is removable from the assembly to allow for easy CFM adjustment. Each enclosure is designed to specifically accommodate eFlow-CAR and expertly welded to prevent unwanted air leakage. The assembly is custom sized for each project.

Available Options:

● Supply Application
● Exhaust Application
● Back inlet
● Side inlet
● Top inlet
● UL rated 555, 1 ½ hours, thin line Fire damper
● Aluminum grille
● Retrofit Gasket

 

e2Flow® PLUS FACTS (ZRT Alternative Solution)

e2Flow® PLUS system is designed to introduce flexibility and demand control to central ventilation systems. It is used to achieve a combination of low-flow continuous indoor air quality ventilation and on-demand high-flow spot ventilation using the same central fan system. This high efficiency ventilation system promotes high indoor air quality, energy savings and reduces operating costs. This system is used in both large and small systems. Unlike any other product on the market, e2Flow® PLUS offers flexibility in engineering design where system’s components are tailored to the project’s requirements. Combination of two eFlow devices are used to achieve controlled minimum and maximum airflow. e2Flow® PLUS offers simple in-line installation where no mounting hardware or additional support is required. 

e2Flow® PLUS is ideal for bathroom, kitchen exhaust, makeup air, new constructions, retrofits and so much more. 

  • Achieve a combination of low-flow continues ventilation and on-demand high-flow spot ventilation
  • Mix & Match eFlow products for optimal solution
  • Easy in-line installation
  • No mounting hardware or additional support required
  • Low installation cost 
  • Refer to schematic for installation illustration   

 

Visit eflowshop.net for product information and pricing or email [email protected]

 

 

 

 

 

 

 

 

 

 

 

Supprier to American Aldes assemblies: ccar-ii, car-iia, ccar-ii-lp, car-ii-hp, car-fea-ii, car-fsa-ii, cer-s-ii, cer-r-ii, cer-lp-sii, cer-lp-r-ii, cer-s-iir, cer-lp-s-iir, cer-fea-ii, cer-fea-iir, cer-lp-fea-ii, cer-lp-fea-iir, csr-s-ii, csr-r-ii, csr-lp-s-ii, csr-lp-r-ii, csr-s-iir, csr-lp-s-iir, csr-fsa-ii, csr-fsa-iir, csr-lp-fsa-ii, csr-lp-fsa-iir, cerb-ws-ii, cerb-wb-ii, cerb-cs-ii, cerb-cfs-ii, cerb-cfb-ii, csrb-ws-ii, csrb-wb-ii, csrb-cs-ii, csrb-cfs-ii, csrb-cfb-ii, Constant Exhaust Registers, Constant Supply Registers, Constant Exhaust Register Box, Constant Supply Register Box, zone register terminals, zrt, zrt-s, zrt-fr, zrt-frs, zrt-w, zrt-ws, zrt-w-fr, zrt-w-frs, zrt-il, zrt-pdil, zrt-pdil-hp, zrt-3pdil, zrt-3pdil-hp, zrt-sdil, zrt-sdil-1-hp

Aldes, American Aldes, car ii, car iia, car ii lp, car ii hp, car fea ii, car fsa ii, cer s ii, cer r ii, cer lp sii, cer lp r ii, cer s iir, cer lp s iir, cer fea ii, cer fea iir, cer lp fea ii, cer lp fea iir, csr s ii, csr r ii, csr lp s ii, csr lp r ii, csr s iir, csr lp s iir, csr fsa ii, csr fsa iir, csr lp fsa ii, csr lp fsa iir, cerb ws ii, cerb wb ii, cerb cs ii, cerb cfs ii, cerb cfb ii, csrb ws ii, csrb wb ii, csrb cs ii, csrb cfs ii, csrb cfb ii, zrt s, zrt fr, zrt frs, zrt w, zrt ws, zrt w fr, zrt w frs, zrt il, zrt pdil, zrt pdil hp, zrt 3pdil, zrt 3pdil hp, zrt sdil, zrt sdil 1 hp

United enertech precision flow system crb-10-s, crb 10 s, crb-10-e, crb 10 e, crb-10-e-cd, crb 10 e cd, crb-10-s-cd, crb 10 s cd, crb-10-e-cd, crb 10 e cd, united enertech precision flow model cr, precision flow model cr-lp, precision flow model cr-hp, young regulator cvr constant volume regulator ,model cvrf5, model cvr8, cvp plus enh

nailor constant volume regulator CVR-SP, CVR-LP, CVR-HP, CVR-T, CVR-GM, CVR-FD

eFlow CAR can be used as equivalent to aldes CAR3, CAR3-s, CER3-S, CER3-R, CER3-S-F, CSR3-S, CSR3-R, CSR3-S-F, CEB3-WS, CEB3-WB, CEB3-CS, CEB3-CS-F, CSB3-WS, CSB3-WB, CSB3-CS, CSB3-CS-F

 

Menu
0 $0.00

Search for products

Back to Top
Product has been added to your cart